Swing | 10" | 254 mm |
Centers | 27" | 685.8 mm |
Power | 5.5 hp | 4.1 kW |
Workhead Power | 4 hp | 3 kW |
Workhead Speed | 320 RPM | 320 RPM |
Grinding Wheel Dia. | 12" | 304.8 mm |
Max Weight Between Centers | 220 lb | 99.8 kg |
Dimensions | 97” L x 32” W x 69’’ H | 97” L x 32” W x 69’’ H |
Weight | 4500 Lbs. | 4500 Lbs. |
Reference #: GMT-1768
Model #: 1300
Serial # : BO 92088
Year of manufacture: 1979'
Maximum diameter ground with new wheel: 10"
Maximum grinding length between centers : 27"
Maximum workpiece weight between centers: 220 Lbs.
Table traverse fine feed graduations: 0.0002”
Table traverse per revolution of handwheel: .5"
Table traverse steplessly variable per minute: 3” – 144”
Table swivel adjustment:
Included angle clockwise: 16°
included angle counterclockwise: 18°
Cross traverse of wheelhead: 8-1/16”
Cross feed handwheel graduated in increments of: .0002”
Feed inching lever graduated in increments of: .0001”
Automatic infeed of wheelhead at each reversal of table: .0001” - .0006”
Infeed rate at table reversal, reduction in work diameter: .0002” - .0012”
Maximum range of continuous infeed for plunge grinding allows a reduction in work diameter: 0.040”
(6) Workhead speeds: 40 – 320 R.P.M.
Workhead swivel, clockwise/counter-clockwise: 15 degrees clockwise, 90 degrees anit-clockwise
Tailstock spindle center taper: Jones & Shipman taper
Tailstock spindle center taper: #3 Morse
Standard grinding wheel (EIU Type): 12” Diameter x 1-1/2” Wide x 5” Bore
(2) Wheelhead speeds: 2,000 & 2,650 R.P.M.
Wheelhead swivel adjustment each side of normal position: 180 Degrees
Internal grinding spindle speed: 16,500 R.P.M.
Internal grinding capacity: ¾” – 2” Diameter
Manually operated or hydraulically actuated table traverse
Manually operated, Automatic Intermittent (at table reversal), and Automatic Continuous (Plunge grinding) modes of wheelhead infeed
EIU type wheelhead with 180° swivel, left hand external grinding operation, and swing-around internal grinding attachment with spindle
3/4 H.P. 3/60/220-440 volt motorized workhead mounted on a graduated swiveling base arranged for live and dead spindle operation
9" Diameter KANET permanent magnetic chuck for workhead
Tailstock with plain center
Self-contained hydraulic system with 1 H.P. motor
External coolant pump and tank
BIJUR manually operated one-shot lubrication system
5.5 H.P. 3/60/220-440 volt 1,720 R.P.M. wheelhead motor and electrical controls
Machine is wired for 220 volt operation.
We use cookies to improve your experience. Privacy Policy.
We use different type of cookies to optimize your experience on our website. You may choose which type of cookies to allow and can change your preferences at any time. Remember that disabling cookies may affect your experience on the website. You can learn more about how we cookies by visiting our Privacy Policy.
These cookies are necessary to the core functionality our website and some of its features, such as access to secure areas.
These cookies are used to enhance the performance and functionality of our website but are nonessential. However, without these cookies, certain functionality may become unavailable.
These cookies gather information to help us understand site usage, measure marketing effectiveness, and personalize your experience.
These cookies enhance ad relevance, prevent repeat ads, ensure proper display, and sometimes tailor ads to your interests.