K.O. LEE # B6062H “DAKOTA” Tool & Cutter Grinder Hydraulic USA #GMT-2522

Reference #: GMT-2522
Model # : B6062H
Serial # : 25422WC
Year of manufacture: 1990’s Approx.
Swing over table: 12-1/4”
Size of sub table: 8” x 48”
Table working surface: 5-1/4” x 37-1/4”
Size of table t-slot: 7/16”
Table swivels: 225°
Table calibrations on left end either side of center: in degrees- Plus or Minus 15 / in taper per foot- 3”
Wheelhead swivels: 360°
Minimum/Maximum distance centerline of wheel shaft to top of table: 5-3/8” – 15-1/4”
Column diameter : 6"
Vertical movement of column feed each revolution of handwheel (.001" graduation): 10-1/2” / .050”
Distance between tailstocks: 32"
Distance between chuck face and tailstock: 25-1/2”
Distance between collet in workhead and tailstock: 27"
Distance between centers mounted in workhead and tailstock: 26"
Total cross feed and feed each revolution of handwheel (.001" graduation): 8” - .100”
Grinding wheel hole size: 1-1/4”
Centerline height of fixtures to top of table: 6.130"
Maximum distance from column to outside of straightwheel; dovetail slide extended/not extended, spindle 90 degrees to table: 11-1/2” / 6-3/8”
(4) Grinding wheelhead speeds, with pulley changes: 2,840 – 5,330 R.P.M.
Wheel diameter: ¼” – 6”