Equipment
Keyseaters
Keyseaters
HANSFORD DAVIS 15 KEYSEATER BROACH 1989’ USA #GMT-2640
Sold

HANSFORD DAVIS 15 KEYSEATER BROACH 1989’ USA #GMT-2640

Keyseaters
Manufacturer:
HANSFORD DAVIS
Model:
15
Stock #:
5461
HANSFORD DAVIS 15 Keyseater Broach 1989 available. Model 15, Serial #1216, Reference #GMT-2640. Specs: 1/16"–1-1/2" keyway cuts, 42 strokes/min, 4-1/2” stroke length, 20"x31" table, 3 t-slots, 19" throat depth, 12" max work height, 80 PSI for auto feed. Includes micrometer depth stop, tooling, coolant pump, 2 HP motor. Wired for 440V.
Max Keyway Capacity1.5"38.1 mm
Max Length of Cut31"787.4 mm
Dimensions30” x 48” x 55” H30” x 48” x 55” H
Weight1450 Lbs.1450 Lbs.

Reference #: GMT-2640
Model # : 15
Serial # : 1216
Year of manufacture: 1989'
Cuts keyways in steel: 1/16" to 1-1/2"
Strokes per minute: 42
Length of stroke: 4-1/2”
Table size: 20” x 31”
Number of t-slots in table: 3
Table movement: 1-1/2”
Throat depth, from face of 1" wide cutter to arm post: 19"
Maximum work height, from table to surface: 12"
Maximum length of cut with 3/4" high bushing holder:
16" long cutter: 4”
20" long cutter: 8"
24" long cutter: 12"
30" long cutter: 18"
Air pressure required for automatic feed: 80 P.S.I.

Pneumatically actuated automatic feed: A three position selector lever enables the operator to switch the machine from manual operation for set up to full automatic feed during the cutting stroke and back-off during the return stroke for standard work. The auto back off is provided automatically to back off the cutter during the return stroke while feeding special jobs by hand.

Micrometer depth stop

Assortment of tooling (as shown in photos)

Coolant pump

2 H.P. 3/60/220-440 volt drive motor and electrical controls

Machine is wired for 440 volt operation.

We use cookies to improve your experience. Privacy Policy.

Accept