Swing | 25" |
Centers | 120" |
Spindle Bore | 4.125" |
Power | 15 hp |
RPM | 1,250 RPM |
Swing Over Cross Slide | 17" |
Dimensions | 185” L x 48” W x 67’’ H |
Weight | 8500 |
Reference # GMT-3353
Model # 24-4 x 120 B
Serial # 35803
Year of manufacture- 2005’
Swing over bed- 25”
Swing over cross slide- 17”
Swing over gap- 32-5/8”
Length of gap- 15”
Distance between centers- 120”
Spindle speeds- (21) 20 – 1,250 R.P.M.
Spindle hole- 4-1/8”
Spindle nose- D1-8 Camlock
Inch threads- (64) ¼” - 60 T.P.I.
Metric threads- (64) .5 – 120 mm
Module threads- (64) .125 – 30
Diametral pitch- (64) 1 – 240
Longitudinal feeds- (124) .00145 - .44474
Cross feeds- (124) .0007 - .22237
Leadscrew diameter- 2”
Cross slide travel- 11-3/8”
Compound rest travel- 5-3/8”
Tailstock quill travel- 9-1/2”
Tailstock quill diameter- 2-15/16”
Tailstock taper- #5 Morse
Bed width- 15-3/4”
2 Axis NEWAL DRO
Hardened and ground bedways
4 Way rapid traverse Joystick
Taper attachment (less guide block)
Threading dial
Inch / metric handwheels
16” BISON 4 Jaw Chuck
(2) Steady rests / roller type / 11” & 6-1/2” capacity
2- Speed tailstock
Coolant tank & pump
Spindle motor 15 H.P.
Machine is currently wired for 230 volt / 3 phase / 60 H.Z.
Machine weight- 8,500 Lbs.
Machine dimensions- 185” L x 48” W x 67’’ H
Machine location- F.O.B. Bradenton, Florida