| Swing | 16" |
| Centers | 40" |
| Spindle Bore | 2.1" |
| Power | 10 hp |
| RPM | 2,000 RPM |
| Swing Over Cross Slide | 9.8" |
| Dimensions | 84” x 64” x 68” H |
| Weight | 3,450 Lbs. |
HARRISON M400 16”/23” x 40” cc Gap Lathe #GMT-3626
Reference # GMT-3626
Model # M400
Serial # 400712
Swing over bed- 16-1/2”
Swing in gap- 23”
Swing over cross slide- 10”
Distance between centers- 40”
Spindle nose, Camlock, type- D1-8
Hole through spindle- 2-9/16”
(18) Spindle speeds, dial selected- 40 – 2,000 R.P.M.
Tailstock spindle diameter- 2-7/8”
Tailstock spindle travel- 6-1/8”
Tailstock spindle center taper- #5 morse
Inch thread range (38)- 2 – 72 T.P.I.
Metric thread range (35)- 0.2 – 14 mm
Longitudinal feeds- .0016 - .028 I.P.R.
Cross feeds- .0008 - .014 I.P.R.
All-geared headstock with REISCHAUER ground gearing and pressurized lubrication from a separate oil tank
Camlock spindle mounted in GAMET super precision roller bearings
Universal gearbox for total inch/metric threading capability
Induction hardened and ground bedways
Forward-Reverse clutch drive with mono-lever control at apron
10" Bison 3 Jaw Chuck
Follow rest
Threading dial
Live center for tailstock
10 H.P. 3/60/230-460 volt spindle drive motor and electrical controls
Machine is wired for 230 volt operation.
Machine weight- 3,450 Lbs.
Machine dimensions- 84” x 64” x 68” H
Machine location- F.O.B. Sarasota, Florida
